Sunday 8 September 2013

Configure VoIP in your Cisco SPA122 adapter

You can use an SPA 122 adapter to setup your own voip phone. You have to get a DID number from a provider and configure it on the voip adpter. To configure it on the SPA 122 follow the step after getting the DID number.
The default ip to access voip adapter is http://192.168.15.1
Connect the computer to use DHCP and connect it to the yellow port of the voip adapter.
access http://192.168.15.1 from your internet browser or any other browser. You will be prompt to enter the username and password. Enter admin/admin as username and password.
Once you enter the username /password you will be on the quick setup. Enter the following information provided by your DID provider and submit the changes. Keep the networking in bridge mode if you are connected to a router that is providing the ip address.